Contact Us+8613505873345

Search

Does screw air compressor need to use frequency converter

Jan 21, 2021

Does screw air compressor need to use frequency converter

1. Save energy


    Compared with the traditionally controlled screw air compressor, the energy saving is of the most practical significance. The working condition of the air compressor supplied according to the air volume demand is economical operation.


    2. Cost reduction


    The operating cost of a traditional air compressor consists of three items: initial purchase cost, maintenance cost and energy cost. The energy cost accounts for about 77% of the compressor operating cost. The energy cost is reduced by 44.3%, coupled with the reduction of the impact on the equipment after the frequency conversion start, the maintenance and repair amount is also reduced, so the operating cost will be greatly reduced.


    3. Improve pressure control accuracy


    The frequency conversion control system has the best pressure control capability. Make the air pressure output of the air compressor match the air volume required by the user's air system. The output air volume of the air compressor changes with the change of the motor speed. Because the accuracy of the frequency conversion control motor speed is improved, it can keep the system pressure change of the pipe network within the range of 3pisg, that is, within the range of 0.2bar, which effectively improves the quality of the working conditions.


    4. Extend life


    The frequency converter starts the compressor from 0HZ, and its starting acceleration time can be adjusted, thereby reducing the impact on the electrical and mechanical components of the compressor when starting, enhancing the reliability of the system, and extending the service life of the Shanghai air compressor. In addition, the frequency conversion control can reduce the current fluctuations when the unit starts. This fluctuating current will affect the power consumption of the grid and other equipment. The frequency converter can effectively reduce the peak value of the starting current to the lowest level.


    5. Reduce noise


    According to the working conditions of the air compressor, after the frequency conversion speed regulation reformation, the motor running speed is obviously slowed down, so the noise during the operation of the air compressor is effectively reduced. Field measurements show that the noise is reduced by about 3 to 7 decibels compared with the original system.