Contact Us+8613505873345

Search
Banner

18.5kw Softstarter External Bypass Contactor

Description

Product Details:
Brand Name: SAFESAVE
Model Number: SJR3-2018
Rated power: 18.5kw
Type: 3-phase
Power supply: 380VAC
External bypass: Yes
Communication port: RS485
Packing Dimension: 38*23.5*27.5cm
G. W: 5kg
Warranty: 18 months

Share:

Product Details

Technical Parameter

softstarter



Video of SJR3 series motor soft starter


Product Overview:

According to the market demand, our company has made further technical improvement in both the software and the structure of the soft starter SJR3-2000 series. As another great achievement achievement in the intelligentization of motor protection and networked technology application, it simplifies the circuit, reduces the volume, cuts the cost, makes installation and using more convenient.



ac motor starter



The list of rated power for SJR3-2000 Seriesimage





ac motor softstart



Dimensions:

4

5



Application:

6


Certificate:

7


Electrical parameters of SJR3 series softstarter
Three-phase power supplyVoltage(AC) 380V±15%(220V and 660V optional)
Frequency 50Hz/60Hz
Applicable motorSquirrel cage three-phase asynchronous motor
Starting frequency When the motor is fully loaded, it shall not start more than 4 times per hour;
Less than 10 times per hour with no or little load
Protective classIP20
Anti shock Accorded with IEC68-2-27:15g, 11ms
Seismic capacityVibration intensity is 0.5G or less at an altitude less than 3000 meters
Ambient temperatureThe capacity needn't be reduced when the working temperature is between 0℃ and
40℃(At the temperature between 40℃ and 60℃, the current should be decreased 2% whenever the temperature is 1℃ higher.)
Storage temperature-25℃~70℃
Ambient moisture93% no condensation or drip, in line with IEC68-2-3
Maximum working The capacity will not be reduced when the working height is less than 1000 meters( If
is higher than 1000 meters, the current will be decreased 5% whenever it is 100 meters higher.)
Cooling means Natural cold wind
Installation angle Vertical installation and the angle of tilt should be in the range of ±10°