Brand Name: SAFESAVE
Model Number: SST-N37
Input/Output power: 37kw
Rated Current: 75A
Input/Output voltage: 380v three phase
Built-in bypass: Yes
Packing Dimension: 31.1*13.5*18cm
G. W: 2.5kg
Warranty: 18 months
SST series soft starter is a good substitute for traditional startup (eg. direct startup, auto-decompression startup, star triangle startup). By reducing volume, weight, equipment loss , maintenance and installation costs it is much more economical than the traditional old start-up method concerning the integrated application cost. It can effectively reduce the surge or the voltage drop of the power grid as well as mechanical stress and abrasion when starting. Compared with auto-decompression start-up mode, it is more suitable for frequent start-up and shut-off operation, and can provide higher start-up torque and smoother start-up effect than star triangle start-up mode. What’s more, instead of six motor wires, only three rated motor outlets are needed, which connection is also more simple than star triangle start-up.
1. Timesaving, laborsaving and space saving due to needless installation of external bypass contactor.
2. SCR module is made by German SEMIKRON and the main control chip DP by Italian STMicroelectronics.
3. Elegant appearance due to wire drawing anodic oxidation technology, high-strength aluminum body, no corrosion with acid and alkali salt spray.
4. Control unit can be used easily without independent power supply or even with no three-phase four-wire power.
5. Be connected with no need to input the motor parameters, built-in intelligent procedures, or the preset parameters.
6. The volume of the body is still reduced by 60% compared to the same type of products founded in the market even it is integrated with bypass contactor
Video of SST Series Softstarter
Advantages of SST series soft starter:
Q: How can you guarantee the quality?
A: We believe the quality is controlled through the whole process of order. Our full process inspection is composed of raw material inspection,mid-term inspection, final inspection and sampling inspection.We strongly invite you visit to our factory before the shipment to reach a final inspection.
Q: Can we use our shipping agent?
A: Yes. We can also recommend some forwarders for you to compare the prices and services and make your decision.
Q: Where is your factory located?
A: We are located in Shanghai, China.
Electrical parameters of SST series soft starter
|Standard||GB 14048.6-2008/IEC 60947-4-2:2002|
|Rated operational voltage||200-415V(-15%+10%)|
|Max. length between |
soft starter and cable
|Permissible ambient environment||operation: -20℃～+60℃(consider reducing capacity if >40℃)|
|Permissible installation height||5000m(start to reduce capacity for above 1000m)|
|Starting frequency||≈20 times/hour(Class10 standard load)|