Description
Product Details:
Brand Name: SAFESAVE
Model Number: SJR3-2000 Series
Rated power: 9kW-630kW
Type: 3-phase 660V
External bypass: Yes
Communication port: RS485
Application: Crusher/Fan/Compressor
Warranty: 18 months
Video of SJR3-2000 series motor softstarter
Product Overview:
Zhejiang Saikong SJR3-2000 660V series ac motor soft starter is the latest developed by our company. It provides complete motor protection functions including start control, running and overloading, phase failure, three-phase unbalance, over-voltage, under-voltage protection and so on.
Product Features:
1. Easy to control
2. Long life
3. Liquid crystal display
4. No need for control circuitry
5. Space saving
6. Labor saving
The list of rated power for SJR3-2000 series soft starter
Inspection and preparation before running:
The following should be inspected and prepared before starting running
1) Check if the connections are correct or not, particularly, the output terminals should not be connected to the power, and confirm if the grounding terminal is well grounded or not.
2) Confirm theres no short circuit or short circuit to earth between the terminals or the exposed live parts
3) Upon the power is connected, the keyboard panel shall display(Zhejiang Saikong )or [ready] status.
Running method:
Select appropriate operation method as required, the soft starter is set to be panel controlled when delivery
◎ Upon the power is connected, the keyboard panel shall display(Zhejiang Saikong )or ready status, press the start button, the motor will be started.
◎ Input setting entry FP according to the rated current value on the name plate of the motor.
◎ Upon start, check if the rotation direction of the motor is correct or not, if no, press the stop button to stop the motor or cut off the power if necessary, then switch any two wires of the motor(U1, V2, W3)
◎ If the motor fails to reach good start status, refer to the section of starting mode and application of the soft starter in page 12 to select proper settings
◎ If the torque fails to reach good effect, change the starting voltage code F0(under voltage mode)or current limiting code F5(under current mode)to increase the start torque of the motor
◎ Once power of the soft starter is on, please do not open the cover, otherwise there maybe risks of electric shock.
◎ In the process of trial running after power on, if there's any abnormal phenomenon, such as abnormal sound, smoke or odor, please cut off the power immediately and find out the causes.
◎ Press the stop button or external control stop button to reset the fault status.
Note: when the ambient temperature is below-10 C, please get the power on and start the soft starter after preheating for 30mins
Dimensions of SJR3 series soft starter:
Application of SJR3 series soft starter :
Certificate:
FAQ:
Q: How can I get the quotation?
A: Please send us information for quote: power rate, voltage, phase, and any other requirements.
Q: When can I get the sample?
A: 1-2 days.
Q: What is the price of shipping?
A: Depending upon the port and the means of delivery, prices varies.
Reference for application fields
Application of mechanical type | load type | The executive ability of SJR3 | Starting current(%) | Starting time(s) |
Centrifugal pump | Standard load | Slow shutdown protection(to eliminate water hammer), under-load protection or protection against phase inversion | 300 | 5-15 |
Piston pumo | Standard load | Run test.Control of no-lubrication run and pump rotation direction. | 350 | 5-15 |
Fan | Standard load, heavy load if>30s | Having detected overload or under load caused by blockage, it will provides braking torque.(click on fan to interrupt drive) | 300 | 10-40 |
Shrink machine | Standard load | Motor protection, the motor can also provide special | 300 | 5-10 |
Screw compressoe | Standard load | Provides protection against phase reversal,and is used for automatic discharge of contact when the machine is stopped | 350 | 3-20 |
Centrifugal compressor | Standard load, heavy load if>30s | Provides protection against phase reversal,and is used for automatic discharge of contact when the machine is stopped | 300 | 10-40 |
Piston compressor | Standard load | Provides protection against phase reversal,and is used for automatic discharge of contact when the machine is stopped | 350 | 5-10 |
The transmission belt/ transmission machine | Standard load | The process control of fault detection or the under-load control of the circuit | 350 | 3-10 |
Spiral crane | Standard load | Overload control of harsh environment detection | 300 | 3-10 |
T-cable car | Standard load | Overload control of blockage detection | 300 | 2-10 |
Elevator | Standard load | Overload control of blockage detection.Constant start of varying load | 400 | 5-10 |
Saw/band | Standard load | Fast stop brake | 300-350 | 5-60 |
Crusher/chip cutting machine | Heavy load | Control starting torque | 400 | 3-10 |
Blender | Standard load | Current display,indication of product density | 350 | 5-20 |
Mixer | Standard load | Current display | 350 | 5-10 |
Lapping machine | Heavy load | The vibration is limied when the machine is stopped.Overload control of blockage detection | 450 | 5-60 |
Crushing machine | Standard load | The vibration is limied when the machine is stopped.Overload control of blockage detection | 400 | 10-40 |
Refining machine | Standard load | Control starting and stop torque | 300 | 5-30 |
Press | Heavy load | Increase working cycle brake | 400 | 20-60 |
Tracting lift | Standard load | Overload control of blockage detection or under load control for the detection of breakpoints | 400 | 2-10 |
Lifting screw | Standard load | Overload control of blockage detection or under load control for the detection of breakpoints | 300 | 3-10 |
Tracting lift | Standard load | Overload control of blockage detection or under load control for the detection of breakpoints | 400 | 2-10 |
Lifting screw | Standard load | Overload control of blockage detection or under load control for the detection of breakpoints | 300 | 3-10 |
Previous: No Information